Feedback Improving your Tx
From time to time we receive words of appreciation. We would like to share some of these on this page.
-
2017-12-17 Thank you Bertand, and also to the rest of the team - fantastic job with 2.2.1! I think I should say that OpenTx has been an absolute godsend for many like myself who fly F3X gliders, it's opened up all kinds of exciting avenues (latest project is Lua based snapflap mix for ultimate in-flight adjustability). I really cannot imagine going back to another system - OpenTX is simply the best. Keep up the great work and seasons greetings
Mike Shellim
-
2017-12-17 Quel superbe projet collaboratif ! Le développement d'OpenTX est impressionnant tant sur le fond que sur sa forme. C'est un régal de pouvoir mettre en œuvre ses besoins d'aéromodéliste sur un système d'exploitation d'une si grande souplesse. Merci et continuez à nous surprendre
Alexis Pons
-
2016-09-03 Words can not describe my gratitude or admiration for what you have accomplished. I will have an effect on me for the rest of my life.
Susan Holbert
-
2016-08-18 OpenTX 2.1.8. Hi all, thank you very much for all your work and efforts in creating this major release that pushes my Taranis X9D even further. Keep going and look forward. Ciao.
Roberto Orsello
-
2016-05-03 Hi Bertrand, than you for the Great work. Especially the Telemetrie pass through!
Gerald als dk7xe
-
2016-01-15 I decided to buy a Taranis Plus. I am amazed by how OpenTX evolved. Last year I reached the second place with my old Turnigy 9x. I also considered Taranis X9E, but i have to attach pole for windvane and its also more expensive. I just want to thank you, for you about your work!
Tamas Varga
-
2016-01-02 I have just retired my MPX mc4000 and loved their software. You saved me from going back to the Eastern radio method as OpenTx is an advancement on the mc4000 and better still it is continually being improved. Thank you!
George Carnie
-
2015-11-11 Thanks a lot for the open-tx. Great work !
Tadeusz Adamowski
-
2015-08-30 Wish it could be more. Thanks for the great work. I switched from a prescriptive system in Nov 2014, futaba. Can not imagine going back.
David Huelster
-
2015-08-28 I'm very impressed with the way Open TX functions on the Taranis. I hope this small donation is a worthwhile amount for "the cause". Best wishes
Steven Poretz
-
2015-07-18 Thank you for the good work. OpenTX just keep on impressing.
Christoffer H Henni
-
2015-04-29 A little helping hand to get OPEN TX moving for the upcoming FrSky Horus :)
Peter Glassey
-
2015-04-22 Hi Bertrand and everybody participating in this great project, thank you very much for your work and for this major release! Ciao.
Roberto
-
2015-02-09 Bonjour, Je viens de passer sur OpenTX avec une Taranis Plus et je suis conquis. Merci pour le travail fourni. L'apprentissage n'est pas des plus rapide, mais une fois que l'on a pigé la logique, c'est le pied...
Pierre Rondel
-
2014-11-12 Thanks for all the great work you guys to on the OpenTx project. I enjoy my Taranis with OpenTx. Hope this donation helps.
Jeffery Golias
-
2014-10-19 I'm using OpenTx on a FrSky Taranis and it is fantastic. Thank you!
Eugene LaFaille
-
2014-09-12 Felt like I owed you for all the work on 2.0. It really is a marvelous piece of work!
Andrew Fernie
-
2014-07-30 Thanks to you for working so hard on this awesome software! What a joy it is to use!
Joshua Bardwell
-
2014-07-28 Thank you for the excellent opensource firmware for my FrSky Taranis!
Michael Napolitan
-
2014-07-22 Just want to express my thanks to all of you guys for the work that you have been religiously doing for the hobby that we all love. I now have a Transmitter that I can use for my several model aircrafts and helicopters that I have collected and flown over the years. I have various transmitters that I can now dispose of. The Taranis Frsky will always be my transmitter of choice. I still have to learn a lot from the simulation that is easily available right in my computer. Regretfully, I am not a computer programmer hence I can only show my appreciation through donation.
Ramon K
-
2014-07-19 Vous faites vraiment un travail formidable, bravo, continuez à nous surprendre, cette radio n'est que du bonheur grâce à vous. MERCI.
Bernard Delpy
-
2014-07-03 Sur la demande de mon mari, qui pratique l'aéromodellisme depuis 40 ans et qui ne parle pas le francais: s'il vous plaît, ralentissez l'élargissement des fonctions un peu, il a beaucoup de modèles et il prend beaucoup de temps pour les programmer tous. Pour autant, un grand compliment à votre team de programmeurs, ils sont épatants! Bien le bonjour du Nürburgring en Allemagne! Diane et Dietmar
Dietmar Drees
-
2014-07-02 OpenTX is an excellent piece of software. Thank you so much for your time and effort.
Russ Stutzman
-
2014-06-06 Second donation. For the first time in 25 RC years I'm happy with my TX :) Thanks.
Arold Reinders
-
2014-06-02 Thanks for all your work on Taranis and Companion!
Gordy Louisville Kentucky
-
2014-06-02 A BIG "thank you" to you for your fantastic and altruist eforts !
Rafael Eric Suarez Nordlow
-
2014-06-02 Thanks for the good work!
Harvest Lane
-
2014-06-02 Thanks for OpenTX 2.0!
Felix Kaiser
-
2014-06-02 A big Thank You to you and the whole Open Tx team!
Emanuel Stassar
-
2014-06-02 Bonjour ce soft et care-ment genial et ce don et la pour vous encourager a le faire evoluer. Tres longue continuation a OpenTX!
2013-1-05
-
2014-05-31 I have been amazed at what I can do with my Taranis over the last year and realized I should probably show my appreciation. merci beaucoup
Thomas Svedman
-
2014-05-17 Thanks for your excellent work !
David Laburthe
-
2014-05-07 Merci Bertrand, Andre, et tous les autres. OpenTX c'est de la balle, incroyablement puissant.. bravo, chapeau et courbettes.
Christoph Schroeter
-
2014-05-01 Thanks for all the world class work !
Daryl Dacko
-
2014-03-19 I really appreciate your devotion on the development of OpenTx. Regards!
Heung-Jin from S. Korea
-
2014-03-11 From ShowMaster for the latest and soon sd flash FW updates. Keep up the great work.
ShowMaster
-
2014-03-08 Your work on OpenTx is truly appreciated, it's an amazing system. You do awesome things, hopefully you can continue to be awesome.
Arron Bates
-
2014-02-08 Hello guys, another small contribution to your work. May the Force Be with You (Obi-Wan Kenobi)
Aviomotive
-
2014-01-31 Perfect, keep it rolling. Regards from Germany
Dietmar Drees
-
2014-01-16 Magnifique logiciel, tres fin. Encore bravo !
Eric Jacquin
-
2013-12-08 Hi All, than k you very much for this great Firmware making my radio controlled modelling a wonderful experience! Thank you and keep on developing and improving.
Roberto Orsello
-
2013-12-06 Fabulous firmware guys - keep up the great work, it is much appreciated
Matthew Brett